1
00:00:00,000 --> 00:00:01,200
How can a power plant

2
00:00:01,200 --> 00:00:02,960
generator get damaged with no

3
00:00:02,960 --> 00:00:03,620
fault at all?

4
00:00:04,160 --> 00:00:04,920
It's not a short,

5
00:00:05,280 --> 00:00:06,100
it's synchronizing.

6
00:00:06,740 --> 00:00:07,740
When the breaker closes,

7
00:00:08,100 --> 00:00:09,500
generator and grid must be

8
00:00:09,500 --> 00:00:09,880
in step:

9
00:00:10,360 --> 00:00:10,920
same voltage,

10
00:00:11,400 --> 00:00:13,080
same frequency and same angle.

11
00:00:13,880 --> 00:00:15,220
Like stepping onto an escalator:

12
00:00:15,720 --> 00:00:17,200
step off-beat and the stair

13
00:00:17,200 --> 00:00:17,820
yanks you.

14
00:00:18,480 --> 00:00:19,140
Out of phase,

15
00:00:19,400 --> 00:00:20,520
the grid yanks the rotor

16
00:00:20,520 --> 00:00:21,960
in one jolt and hits

17
00:00:21,960 --> 00:00:22,460
the shaft,

18
00:00:22,800 --> 00:00:24,040
couplings and windings.

19
00:00:25,160 --> 00:00:26,600
IEEE allows closing with up

20
00:00:26,600 --> 00:00:27,700
to 10 degrees of angle

21
00:00:27,700 --> 00:00:28,040
difference,

22
00:00:28,280 --> 00:00:29,640
with very tight frequency and

23
00:00:29,640 --> 00:00:30,240
voltage limits.

24
00:00:31,200 --> 00:00:31,460
But careful,

25
00:00:31,920 --> 00:00:33,360
outside those limits the standard

26
00:00:33,360 --> 00:00:34,900
no longer guarantees it comes

27
00:00:34,900 --> 00:00:35,820
out undamaged.

28
00:00:36,620 --> 00:00:37,680
So it's not a fault,

29
00:00:38,220 --> 00:00:38,900
it's a bad match.

30
00:00:39,660 --> 00:00:41,420
Has yours jolted when synchronizing?

31
00:00:41,900 --> 00:00:43,320
Comment SYNC and we'll tell

32
00:00:43,320 --> 00:00:43,800
you what to check.
