1
00:00:00,000 --> 00:00:01,300
How can a distant fault

2
00:00:01,300 --> 00:00:02,640
on the grid damage your

3
00:00:02,640 --> 00:00:03,400
generator's rotor?

4
00:00:03,980 --> 00:00:05,100
It's not a generator fault,

5
00:00:05,300 --> 00:00:06,560
it's unbalanced current.

6
00:00:07,140 --> 00:00:08,320
When the phases aren't even,

7
00:00:08,720 --> 00:00:09,820
negative sequence appears:

8
00:00:10,280 --> 00:00:11,580
a field spinning backward,

9
00:00:11,580 --> 00:00:12,640
at double frequency,

10
00:00:12,640 --> 00:00:13,440
against the rotor.

11
00:00:14,060 --> 00:00:15,460
Like swimming against the current

12
00:00:15,460 --> 00:00:16,320
at double speed:

13
00:00:16,780 --> 00:00:18,020
all that effort turns into

14
00:00:18,020 --> 00:00:18,320
heat.

15
00:00:18,940 --> 00:00:20,280
That field quickly heats the

16
00:00:20,280 --> 00:00:20,860
rotor surface,

17
00:00:21,240 --> 00:00:22,380
the wedges and the rings.

18
00:00:23,000 --> 00:00:24,560
On cylindrical rotors with direct

19
00:00:24,560 --> 00:00:24,880
cooling,

20
00:00:25,260 --> 00:00:26,660
the standard limits that constant

21
00:00:26,660 --> 00:00:27,260
to 10.

22
00:00:27,260 --> 00:00:28,140
But careful,

23
00:00:28,520 --> 00:00:29,820
if the negative sequence protection

24
00:00:29,820 --> 00:00:30,460
is set wrong,

25
00:00:30,820 --> 00:00:31,940
the damage goes unnoticed.

26
00:00:32,500 --> 00:00:33,420
So it's not the fault

27
00:00:33,420 --> 00:00:33,920
outside,

28
00:00:34,380 --> 00:00:35,620
it's what it leaves inside.

29
00:00:36,140 --> 00:00:36,940
Have you checked your protection?

30
00:00:37,440 --> 00:00:38,960
Comment SEQUENCE and we'll tell

31
00:00:38,960 --> 00:00:39,460
you what to check.
