TEMISA Power Gen · Explainer
Ver en españolHydrogen-cooled generator: why it is used
Hydrogen-cooled generator: hydrogen barely drags on the rotor and cools far better than air. The risk appears if air gets in or purity drops.
Published · 44.8 seconds · subtítulos en español
Short answer
Why are large turbogenerators cooled with hydrogen?
A large turbogenerator makes a lot of heat and spins very fast, so the gas around it must cool it without slowing it. Hydrogen is the lightest gas: it barely drags on the rotor and removes heat far better than air, about 7 times better per the video. It only burns when mixed with enough air, so purity is monitored continuously and the seals must keep air out.
Video transcript
Download captions (.srt)- 00:00
Why are the biggest power
- 00:01
plant generators filled with hydrogen,
- 00:03
the gas that explodes?
- 00:05
It's not crazy,
- 00:06
it's physics.
- 00:07
A large turbogenerator makes a
- 00:08
lot of heat and spins
- 00:10
very fast,
- 00:11
and the gas around it
- 00:12
has to cool it without
- 00:13
slowing it.
- 00:14
Hydrogen is the lightest gas:
- 00:16
it barely drags on the
- 00:17
rotor and removes heat far
- 00:19
better than air.
- 00:20
Like swimming in water versus
- 00:21
swimming in honey.
- 00:23
Compared to air,
- 00:23
it cools about 7 times
- 00:25
better.
- 00:26
But careful,
- 00:27
it only burns mixed with
- 00:28
enough air;
- 00:29
if air leaks in through
- 00:30
the seals or purity drops,
- 00:32
the risk appears.
- 00:33
That's why purity is monitored
- 00:34
all the time.
- 00:36
So it's not a hazard,
- 00:37
it's a coolant.
- 00:38
Does yours use air or
- 00:39
hydrogen?
- 00:40
Comment HYDROGEN and we'll tell
- 00:42
you what to check.
Questions from plant owners
Why use hydrogen instead of air in a large turbogenerator?
It is the lightest gas: it barely drags on the rotor and removes heat far better than air, which cuts losses and temperature in a large, fast machine.
Isn't hydrogen inside the generator dangerous?
It only burns when mixed with enough air. The risk appears if air leaks in through the seals or purity drops, which is why purity is monitored continuously.
What is checked on a hydrogen-cooled generator?
Gas purity, shaft seals, the dryer and leaks, plus stator and rotor insulation during planned outages.
Does TEMISA Power Gen service hydrogen-cooled generators?
Yes: generator diagnostics and overhaul, on site or at the Tlajomulco shop. To quote we need the nameplate and outage window, by email to ventas@temisapowergen.mx.
About the figures: Figures and graphics in the video illustrate the phenomenon. They are not a measurement from a serviced generator and they are not acceptance limits.
About the footage: The video is a TEMISA Power Gen explainer animation. It does not document a customer's machine.
Technical sources
- Power Engineering · Hydrogen cools well, but safety is crucial — Compares hydrogen cooling with air.
These references identify equipment families or background documents. They are not an endorsement by the publisher and they are not an assessment of your generator.
Narration of the TEMISA Power Gen explainer video.
