TEMISA Power Gen · Explainer
Ver en españolRotor retaining rings: the part that can't fail
Retaining rings hold the rotor end windings. Old 18Mn-5Cr rings crack with moisture, and more than 30 have failed in service.
Published · 42.9 seconds · subtítulos en español
Short answer
Why are retaining rings the most critical rotor part?
At each end of the rotor, a retaining ring holds the end windings against centrifugal force at thousands of rpm. Rings made of the old 18Mn-5Cr alloy crack from stress corrosion with moisture, and more than 30 have failed in service. Moisture gets in through cooling leaks or long unprotected outages, which is why rings are inspected with eddy current.
Video transcript
Download captions (.srt)- 00:00
What's the most stressed part
- 00:01
of a power plant generator?
- 00:03
It's not the shaft,
- 00:04
it's a ring.
- 00:05
At each end of the
- 00:06
rotor,
- 00:06
a retaining ring holds the
- 00:08
end windings against centrifugal force,
- 00:10
at thousands of revolutions per
- 00:12
minute.
- 00:12
Like a belt holding all
- 00:14
the weight at full speed:
- 00:15
if it cracks,
- 00:16
there's no warning.
- 00:18
Rings made of the old
- 00:18
alloy,
- 00:19
18 manganese 5 chromium,
- 00:21
crack from corrosion with moisture,
- 00:23
and more than 30 have
- 00:24
failed in service.
- 00:25
But careful,
- 00:26
moisture gets in through cooling
- 00:28
leaks or long outages without
- 00:30
protection.
- 00:31
That's why they're inspected with
- 00:32
eddy current.
- 00:33
So it's not just another
- 00:34
part,
- 00:35
it's the one that can't
- 00:36
fail.
- 00:37
Are yours the old alloy?
- 00:38
Comment RINGS and we'll tell
- 00:40
you what to check.
Questions from plant owners
What does a retaining ring do?
It holds the rotor end windings against centrifugal force at each end, at thousands of rpm.
Why do 18Mn-5Cr rings crack?
That old alloy is prone to stress corrosion cracking with moisture; more than 30 have failed in service.
How does moisture get in?
Through cooling system leaks or long outages without rotor protection.
How are they inspected?
Visually and with eddy current; with indications, rings are removed for full inspection. Contact ventas@temisapowergen.mx.
About the figures: Figures and graphics in the video illustrate the phenomenon. They are not a measurement from a serviced generator and they are not acceptance limits.
About the footage: The video is a TEMISA Power Gen explainer animation. It does not document a customer's machine.
Technical sources
- Power Engineering · Retaining ring replacement — More than 30 in-service failures of 18Mn-5Cr rings; eddy current and ultrasonic inspection.
These references identify equipment families or background documents. They are not an endorsement by the publisher and they are not an assessment of your generator.
Narration of the TEMISA Power Gen explainer video.
